Panasonic AG-HPX250EN - Manual (Page 153)

153
Menu
DIAGNOSTIC screen
Item Setting Notes
VERSION Indicates the version of the firmware used in this camera-
recorder.
A subscreen provides details on which firmware versions
are used.
(Subscreen)
CAM SOFT:
Camera microprocessor software
SYSCON SOFT:
Software for system control microprocessor
P2CS BL2-1:
Boot program 1 for P2 control microprocessor
P2CS BL2-2:
Boot program 2 for P2 control microprocessor
P2CS KR:
P2 control microprocessor kernel
P2CS AP:
P2 control microprocessor application
VUP:
System software used for updating all camera firmware
VUP FS:
File system for updating the camera
CAM FPGA:
Camera FPGA configuration ROM
DM FPGA:
Main FPGA configuration ROM
MODEL NAME Indicates the model name of this camera-recorder.
SERIAL NO. Indicates serial number of this camera-recorder.
OPERATION Indicates the time of the camera-recorder has been on.