Panasonic AG-HPX250EN - Manual (Page 104)

104
TV/Monitor (playback/dubbing)
BNC cable (optional)
HDMI cable (optional)
Video pin cable (optional)
Audio pin cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
Connect one of these
cables to the terminal on
the television or monitor.
TV/Monitor
• VIERA Link is not supported. Please be aware that when using an HDMI cable and connecting this
camera to a device that supports VIERA Link, the VIERA Link of other devices may not work in some
cases.
• From the HDMI OUT terminal, SD signals (480i, 576i) are converted to progressive signals (480P, 576P)
then output.
• Simultaneous display with the LCD monitor and the viewfinder is not possible when outputting video from
the SDI OUT terminal.
For simultaneous display, set SDI OUT on the setting menu OUTPUT SEL screen to OFF and EVF
MODE on the DISPLAY SETUP screen to ON.
• Please use a double-shielded SDI cable (optional).
• Please use a double-shielded HDMI cable (optional).
• It is recommended that you use a Panasonic HDMI cable.
Connecting external units (continued)