Panasonic AG-HPX250EN - Manual (Page 138)

138
SW MODE screen
Item Setting Notes
LOW GAIN Sets the gain value assigned to the L position of the GAIN
switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
MID GAIN Sets the gain value assigned to the M position of the
GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
HIGH GAIN Sets the gain value assigned to the H position of the GAIN
switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
SUPER GAIN Configures super gain allocated to a USER button.
24dB, 30dB
BOTH:
Cycles to the next value in the order 24 dB → 30 dB →
OFF when pressed.
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
ATW Allows you to assign the ATW (Auto Tracking White
Balance) function to the WHITE BAL switch. (Page 33)
Bch:
Controls the ATW function when the WHITE BAL switch is
set to B position.
OFF:
Does not assign the ATW function to the WHITE BAL
switch.
• A USER button to which ATW
has been assigned cannot be
used to turn ATW off when the
WHITE BAL switch is set to B
position and this menu is set to
Bch.
• ATW is not available when the
frame rate is set to 4FRAME or
lower in VFR mode.
HANDLE ZOOM Sets the zoom speed allocated to each position of the
HANDLE ZOOM switch.
L/OFF/H:
Sets LOW/OFF/HIGH to positions 1/2/3 respectively.
(Zoom does not operate when the setting is OFF.)
L/M/H:
Sets LOW/MID/HIGH to positions 1/2/3 respectively.
L/OFF/M:
Sets LOW/OFF/MID to positions 1/2/3 respectively. (Zoom
does not operate when the setting is OFF.)
W.BAL.PRESET Sets the color temperature assigned to the PRST position
of the WHITE BAL switch.
3.2K, 5.6K
Setup menu list (continued)
___indicates the factory setting.