Panasonic AG-HPX250EN - Manual (Page 122)

122
2 Warnings
REMOTE:
Flashes when device settings of wireless
remote control are different.
P2 :
Blinks when no P2 card is inserted or the
card is write protected.
P2 FULL:
Blinks when there is no more space left on
the P2 card.
P2 LACK:
Blinks in loop rec mode when there is not
enough space left on the P2 card.
:
Lights when the battery for the internal clock
is depleted.
• “Charging the built-in battery” (Page 27 of
Vol. 1)
3 Backup unit displays
The following indications show the status of
backup units connected to the DVCPRO/DV
connector.
The following indications are not displayed
when the menu option 1394 CONTROL in the
OTHER FUNCTIONS screen is set to OFF.
1394  : Recording
1394  : Recording standby
1394 : The backup unit cannot be
controlled.
1394 : No backup unit is connected.
1394 – – : A backup unit is connected but
is not in recording or recording
standby status.
4 Recording format and system frequency
indication
1080i
720P
480i
576i
Recording format
• In 1080i, 720P system mode
AVC-I 100: AVC-Intra 100 format
AVC-I 50: AVC-Intra 50 format
DVCPROHD: DVCPRO HD format
•
In 480 (576i) system mode
DVCPRO50, DVCPRO, DV
5 AUTO/MANUAL switch indicator
Indicates when the AUTO/MANUAL switch is
set to AUTO.
6 Information display
The following information is displayed
depending on the situation.
• Performance of auto white balance and auto
black balance
• Warning and error indication
• Information on switch and button operations
• “MODE CHECK indication” (Page 131)
7 System frequency display
60 : Indicates in 59.94 Hz mode
50 : Indicates in 50 Hz mode
8 Letter box recording display
This display appears in the 480i (576i)
recording format when LETTER BOX is
selected in the menu option ASPECT CONV in
the SYSTEM SETUP screen.
9 Y GET brightness display
When the Y GET function is used, the image
level at the center of the image is indicated in a
range between 0% and 109%.
10 Recording/playback frame rate display
In native recording, the capture frame rate
and recording and playback frame rates are
displayed.
Example: 60:24PN (recording 60P with the
camera-recorder frame rate set to a
variable frame rate of 24PN)
Playback applies a 2:3 pull-down to perform
24P over 60P, indicating that 24/60 speed slow
playback is performed.
In standard recording only the capture frame
rate is indicated.
Example: 24PA (recording 24PA using 2:3:3:2
pulldown for over 60i recording)
11 Audio limiter display
This is displayed when the limiter is set to work
on CH1, CH2 or CH3, CH4.
Screen displays (continued)