Panasonic AG-HPX250EN - Manual (Page 140)

140
AUTO SW screen
Item Setting Notes
A.IRIS ON:
Performs the auto iris control in auto mode. The IRIS
button is deactivated.
OFF:
Deactivates the auto iris control in auto mode. This
performs the iris control selected with the IRIS button.
• Auto operation switches OFF
when the frame rate is set
to 4FRAME or lower in VFR
mode.
AGC Sets the Auto Gain Control when the ON is selected in
A.IRIS.
6dB:
Performs the Auto Gain Control (max. 6 dB) in auto
mode.
12dB:
Performs the Auto Gain Control (max. 12 dB) in auto
mode.
18dB:
Performs the Auto Gain Control (max. 18 dB) in auto
mode.
OFF:
Does not perform the Auto Gain Control in auto mode.
Initiates the control of the gain selected by the GAIN
switch.
• Cannot be set when A.IRIS is
OFF.
• Auto operation switches OFF
when the frame rate is set
to 4FRAME or lower in VFR
mode.
• AGC does not operate when a
USER button to which S.GAIN
has been allocated is pressed
and super gain is set to 24 dB
or 30 dB.
ATW ON:
Performs the ATW (Auto Tracing White Balance) function
in auto mode. You cannot select ON/OFF of the ATW
function with the WHITE BAL switch or the USER button
when this is selected. However, if ATWLOCK is assigned
to the USER button, you can set the white balance value
with the USER button.
OFF:
Does not perform the white balance function in auto
mode. This performs the white balance function selected
with the WHITE BAL switch.
• Auto operation switches OFF
when the frame rate is set
to 4FRAME or lower in VFR
mode.
AF ON:
Performs auto focusing in auto mode. You cannot use
the FOCUS switch and PUSH AUTO button when this is
selected.
OFF:
Does not perform auto focusing in auto mode. This
performs the focusing selected with the FOCUS switch or
PUSH AUTO button.
• Auto operation switches OFF
when the frame rate is set
to 4FRAME or lower in VFR
mode.
Setup menu list (continued)
___indicates the factory setting.