Panasonic AG-HPX250EN - Manual (Page 79)

79
Playback
Playing back clips
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Push the Operation lever in the ◄ ►
direction and position the pointer on the
clip you wish to play back.
3
Push the Operation lever in the ▲ direction
(► playback).
• The clip under the pointer will be played back
on the LCD monitor.
• When playback of the clip over which the
cursor is placed is finished, subsequent clips
that can be played back are played back in
the order they are displayed on the thumbnail
screen, and when playback of the final clip is
complete the system returns to the thumbnail
screen.
• When playing back clips, it is not
necessary to “select” the clips (blue
frames around the thumbnails).
• Clips with clip numbers displayed in
red cannot be played.
• You can perform actions such as fast forward,
rewind, and pause during operation by using the
Operation lever or remote control. See page 74 for
details.
• During clip playback, push the Operation lever
in the ▼ direction (STOP) to stop playback and
return to the thumbnail screen.
• When playback is stopped, the position
of the pointer moves to the clip that was
being played back, regardless of where the
playback started.
• Push the Operation lever in the ▼ direction
(► play back) again to start playback from
the beginning of the clip under the pointer.
To continue playing from where previously
stopped, turn the PLAYBACK RESUME
setting “ON” in “Setting the thumbnail
display mode” on page 92.
Selecting thumbnails
Multiple thumbnails can be randomly selected in
the thumbnail screen.
1
Push the Operation lever in the ◄ ►
direction to the clip you wish to select, and
press SET.
The frame around the selected thumbnail
changes to a blue frame. Press the SET button
on the Operation lever again to deselect the
clip.
2
Additional clips can be selected by
repeating Step 1.
It is possible to display only the selected thumbnails
in the thumbnail screen for playback.
• “Switching the thumbnail display” (Page 80)
Operation lever
MENU button
LCD Monitor