Panasonic AG-HPX250EN - Manual (Page 154)

154
OPTION MENU screen
Open this menu by holding down the DISP/MODE CHK button and when shooting status appears press
the front MENU button.
• Use this function to check connection status during nonlinear editing.
• Use this function to switch between image production effects.
Item Setting Notes
1394 STATUS Opens the subscreen that shows 1394 status.
(Subscreen)
FORMAT:
Format of input or output signals
RATE:
Transfer rate of input or output signals
60/50:
Signal system of input or output signals
CH:
Channel of input or output signals
SPEED:
Transfer rate of input or output signals
STATUS:
Status of signals output or input via the IEEE1394 digital
interface
VIDEO:
Status of input or output video signals
AUDIO:
Status of input or output audio signals
1394 CONFIG Opens a menu for configuring 1394 functionality.
DFLT, 1 – 255
• Use DFLT for normal operation.
P.A.P FILTER * 1 The type of video filter for improving image quality with 3D
processing technology can be selected.
TYPE1:
This setting is suitable for image production that reduces
noise as far as possible with increased sensitivity by using
a 3D adaptation effect.
TYPE2:
This setting suppresses 3D adaptation effects and is
suitable for an image production with natural sensitivity
and image quality.
• When a setting is changed, the message “TURN
POWER OFF” appears. Then turn the power off and
turn it back on again.
• This item cannot be written to
or read from an SD memory
card as a SCENE FILE or
USER FILE.
Setup menu list (continued)
*1: An image processing circuit for high image quality and high sensitivity using PAP (Progressive
Advanced Processing) technology which takes advantage of 3D processing
___indicates the factory setting.