Panasonic AG-HPX250EN - Manual (Page 125)

125
Displays
33 Recording and playback
REC : Recording
PAUSE : Recording standby
 : Playback pause
 : Play
( ) :
Slow play (Reverse slow play)
( ) :
Frame-by-frame (Reverse Frame-by-frame)
 () :
Fast-forward/Fast-forward play (Rewind/Fast-
backward play)
Ч /Ч (Ч /Ч ) :
Variable-speed search (Reverse variable-
speed search)
CLIP   (CLIP   ) :
Clip forward (clip reverse), cue up of single
clips
CLIP &T   (CLIP &T   )
Cue forward (cue back) to the start point of
clips and text memo points (when the menu
option SEEK SELECT is set to CLIP&T in the
OTHER FUNCTIONS screen)
START:
Indicates that recording has started for a new
clip in one-clip recording mode.
END:
Indicates that compiling to a clip has stopped
in one-clip recording mode.
During DISPLAY OFF, only the REC, START,
and END displays are shown at the top right.
Also displayed at top right, when pre-recording,
loop recording, interval recording or one-shot
recording is set.
Special recording display
This display appears when the menu option
REC FUNCTION in the RECORDING SETUP
screen is set to INTERVAL, ONE SHOT or
LOOP and when PRE REC is set to ON.
L –: LOOP (loop recording)
I –: INTERVAL (interval recording), ONE
SHOT (one-shot recording)
P –: PRE REC (pre-rec recording)
Center information display
The following information displays (Page 122) are
provided.
P2 card recording and playback data
indications
BOS
Beginning of stream. No more data is available in
the rearward playback direction.
CANNOT PLAY
Appears when playback is disabled.
CARD ERR (1) (2) (1/2):
The number identifies the P2 card that is giving
trouble.
UPDATING: Reading card data
CANNOT REC
Appears when recording cannot be started by
pressing the START/STOP button.
EOS
End of stream. No more data is available in the
forward playback direction.
PRE REC ON (OFF) (INVALID)
Appears when the USER button to which pre-
recording has been assigned is pressed.
SHOT MARK ON (OFF) (INVALID)
Appears when pressing the USER button to
which SHOT MARK is assigned.
SLOT SEL (INVALID)
Appears when pressing the USER button to
which SLOT SEL is assigned.
TEXTMEMO (INVALID)
Appears when pressing the USER button to
which TEXTMEMO is assigned.
VFR ON NO AUDIO RECORDING
Appears when audio signal cannot be recorded
with VFR recording.