Panasonic AG-HPX250EN - Manual (Page 143)

143
Menu
AUDIO SETUP screen
Item Setting Notes
LIMITER CH1 Sets the CH1 limiter.
ON, OFF
• When the AUDIO AUTO/MANU
CH1 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
LIMITER CH2 Sets the CH2 limiter.
ON, OFF
• When the AUDIO AUTO/MANU
CH2 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
LIMITER CH3 Sets the CH3 limiter.
ON, OFF
• When the AUDIO AUTO/MANU
CH3 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
LIMITER CH4 Sets the CH4 limiter.
ON, OFF
• When the AUDIO AUTO/MANU
CH4 switch is set to AUTO
and auto adjustment mode is
active, the limiter is disabled
regardless of these settings.
AUTO LEVEL
CH3
Selects the method for setting CH3 level.
ON:
Engages the auto adjustment mode. (The limiter is not
available.)
OFF:
Locks the level.
AUTO LEVEL
CH4
Selects the method for setting CH4 level.
Same setting as AUTO LEVEL CH3.
ON, OFF
25M REC CH SEL Selects the audio channels to be recorded in the DVCPRO
and DV formats.
2CH:
Only recorded on CH1 and CH2.
4CH:
Records on all four channels.
• Not available in the following
conditions.
· When SYSTEM MODE is
1080-59.94i (50i) or 720-
59.94P (50P).
· When SYSTEM MODE is set
to 480-59.94i or 576-50i and
REC FORMAT is set to the
DVCPRO50 codec.
· REC SIGNAL is set to 1394
(operation depends on 1394
input status).
· When compiling to a clip in
one-clip recording mode.
TEST TONE Selects the test signal.
LEVEL1:
A 1 kHz test tone is output during color bar output.
LEVEL2:
Outputs the above test tone at a volume lower than
LEVEL1.
OFF:
Does not output a test tone.
___indicates the factory setting.