Panasonic AG-HPX250EN - Manual (Page 127)

127
Displays
TEMPORARY PAUSE
IRREGULAR FRM SIG:
This message indicates that the input
GENLOCK reference signal is irregular and
that recording has been paused.
TURN POWER OFF
This message indicates that an abnormal event
has occurred, for example, that a card was
removed during access or that a system mode
change was made.
Turn the power off and then turn it back on again.
Camera-recorder status display
(in alphabetical order)
ABB
ABB indicator
ATW ACTIVE
Appears when the AWB button is pressed and
ATW is running.
ATW (ATW LOCK)
Appears when the WHITE BAL switch is set to B
and ATW has been assigned.
AWB
AWB indicator
AWB P3.2K/AWB P5.6K
Displays the color temperature assigned to PRST
when the WHITE BAL switch is set to PRST. Also
displayed when AWB is performed in the PRST
position.
BACK LIGHT
Displayed during iris control when back light
status is changed by pressing the user button to
which BACK LIGHT is assigned.
DIAL: FRAME RATE (SHUTTER/SYNCHRO
SCAN/LOCK)
This is displayed when you switch shutter/frame
rate dial using the dial select button.
DRS ON (OFF)
Displayed when DRS operation has been
changed.
D.ZOOM 10x (2x/5x/OFF/INVALID)
This is displayed when you switch the operation
of the digital zoom.
FBC ON (OFF)
Displayed when FBC operation has been
changed.
GAIN**dB
Displayed when GAIN is switched.
IRIS: MANUAL (AUTO)
This is displayed when you switch the iris
operation.
OIS ON (OFF)
This indicates that the image stabilization function
has been switched on or off.
SCENE******
Displays the name of a scene file selected by
turning the SCENE FILE dial.