Panasonic AG-HPX250EN - Manual (Page 92)

92
Formatting SD memory cards
SD memory cards can also be formatted from
the thumbnail screen. With an SD memory card
inserted into the camera-recorder, perform the
following operation:
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button and select
OPERATION → FORMAT from thethumbnail
menu.
• The following screen appears. Select SD
CARD and press the SET button on the
Operation lever.
• Select EXIT if formatting is not required.
3
The following screen appears. Use the
Operation lever to select YES.
The SD memory card is formatted.
• SD memory cards can also be formatted
from the menu screen. (Page 150)
• Check that no important data remains on a
card before formatting since data erased by
formatting cannot be recovered.
Setting the thumbnail display mode
The thumbnail display mode can be customised to
suit your preferences.
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button and select
THUMBNAIL → SETUP from thethumbnail
menu.
The following screen appears.
INDICATOR:
Select which indicators you want to show on
thumbnails and which you want to hide.
ALL HIDE:
ON: All indicators (MARKER, TEXT MEMO,
WIDE, PROXY) are not displayed.
OFF: Indication/No indication will be set
depending on the following menu. The
factory settings are as follows.
MARKER:
Switches the shot mark marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
TEXT MEMO:
Switches the text memo marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
WIDE:
Switches the wide marker between indication
and no indication (ON/OFF). The factory
setting is ON (indication).
PROXY:
Switches the proxy indicator between
indication and no indication (ON/OFF).
The factory setting is ON (indication).
Thumbnail operations (continued)