Zhone Technologies IMACS-200 - Manual (Page 104)

4-20 General Features
Model No. Running Head TCP/IP Network Management IMACS-200 General Features
DEFAULT IP SLOT
The Default IP Slot options are determined by the choice of Default IP Port. If none, local
ether or ipr-fr is selected for that parameter, this option will show n/a. If wan or sa4 is
selected, the options for this parameter will show wan-1 through wan-4(the WAN card slot
that transmits and receives NMS information).
DEFAULT IP TS
The Default IP Unit options are determined by the choice of Default IP Slot. If none, local
ether, ipr-fr or sa4 is selected for that parameter, this option will show n/a. If wan is selected
above, the options for this parameter will be table, and the user will need to define the
appropriate time slots to be used. (corresponding with the WAN port).
DEFAULT GATEWAY
The Default Gateway is used to control IP forwarding. IP datagrams are allowed being
forwarded to the assigned IP address.
RPT1 IP ADDR
The RPT1 IP Address is the IP address of the first Network Management System host running
an SNMP trap server.
RPT1 COMMUN STR
The RPT1 Community String holds the community string for the first NMS host running a
SNMP trap server. The community string provides additional security by rejecting messages
that do not contain the correct string. There must be some entry in this field to enable RPT1.
RPT2 IP ADDR
The RPT2 IP Address is the IP address of the second Network Management System host
running a SNMP trap server.
RPT2 COMMUN STR
The RPT2 Community String holds the community string for the second NMS host running a
SNMP trap server. The community string provides additional security by rejecting messages
that do not contain the correct string. There must be some entry in this field to enable RPT2.