Zhone Technologies IMACS-200 - Manual (Page 3)

Product Description i
Product Description
1 Product Description
Release 2.0.2 is the fifth software release for the IMACS-200 platform. The IMACS-200
offers a sub-set of the traditional IMACS interfaces optimized for use in smaller locations. It
also is designed to operate over an extended temperature range such that it can be installed in
locations that do not provide a controlled environment. The same "look and feel" of the
IMACS has been maintained for this new product offering so that those familiar with the
IMACS product line will quickly be able to configure and successfully deploy the
IMACS-200. Highlights of this new product offering are outlined below.
2 Features Delivered in Previous Releases
1.0.0
• Data capability: Four LD-SRU ports.
• Voice ports: Four 2-wire E&M transmit only (TO) and four FXS ports.
• Ethernet and RS-232 craft ports
• WAN capability for Four T1 interfaces.
• Two V.35 interfaces.
• Four alarm outputs and four external telemetry inputs.
• Two Optical HSU ports capability is offered as an option conforming to IEEE 37.94
Standard.
• Redundant power supplies of -48VDC, 120VAC or 220VAC are offered as an option.
1.0.1
• Support for E&M Type I and Type II signaling.
• E&M test screen.
• IP Daisy-chaining.
• HSU loop-back capability.
• WAN to WAN trunk signaling to support two IMACS-200’s worth of DS0’s.
1.0.2
• Security enhancement with the introduction of a login log event.
• Fast Circuit Restore
• Allow spaces in the Node ID field
• Main screen notification of individual port states.
• Selection of DXS and CSU WAN functions.