Zhone Technologies IMACS-200 - Manual (Page 122)

4-38 General Features
Model No. Running Head Host Software Upgrade Procedure IMACS-200 General Features
4.8.2 Laptop Setup
Follow the steps listed below to set up the laptop computer.
1. Boot the laptop.
2. Click “START”.
3. Select “Programs”, “Accessories”, and click on “HyperTerminal”.
4. In the HyperTerminal window, double click on “Hypertrm” icon.
5. In the New Connection window, Enter Name: enter Upgrade.
6. Select icon and click OK.
7. In Connect to Window, Connect Using, click down arrow and select “Direct to COM1”.
8. Click OK.
9. In COM 1 window, set BITs per second to “9600” (leave other settings as is) click OK.
10. In Upgrade window, click File menu, select Properties, and select Settings.
11. In Emulation window, select VT100 and click Terminal Setup.
12. Select 132 column mode, click OK.
13. Close Properties window and save.
14. Right click on Upgrade Icon and select Create Shortcut.
15. Drag shortcut to the desktop.
4.8.2.1 Log Upgrade Activity
Create a log to record upgrade activity on a per-site basis that includes the following
information:
• Site name, date and time, and name of technician performing upgrade
• System name(s) and number of ports per system
• Model, serial number, and host version
• Model, serial number, and host version