Flash screen with commands -42 – Zhone Technologies IMACS-200 User Manual
Page 126
Advertising
4-42
General Features
Model No.
Running Head
Software Download Procedures
IMACS-200 General Features
Figure 4-21.Flash Screen with Commands
5. Select the desired command. Press Enter.
The activate, download, and erase cannot be performed on the active software.
6. Enter Y to replace the current software.
The system removes the current software from the selected block.
7. Select the tftp option. Press Enter.
8. Enter the desired number of mismatch retries. Press Enter.
Default value is 20.
9. Enter the desired number of timeout retries. Press Enter.
Default value is 4. The Flash Screen appears with the software removed from the selected
bin.
Advertising