Zhone Technologies IMACS-200 - Manual (Page 233)

OWAN Ports 13-3
13.2.3 OWAN LED Indications
The LEDs included below the port connectors for the OWAN are tri-color LEDs. The LED
can either be off, green, yellow or red. Table 13-1 indicates the color of the LED for the action
indicated.
Table 13-1. LED Status Indicators
13.2.4 OWAN port Cables
The OWAN port utilizes 1310 nm single-mode optical fiber cables with BFOC12.5 (ST)
connectors. Each fiber carries both the transmit and receive signal.
13.3 OWAN port User Screens and Settings
The OWAN ports permit configuration and operation through use of several user screens and
optional settings.
Port State Signal Status LED Color
Active Normal Green
Active Alarm Red
RDNT Normal Yellow
RDNT Alarm Red
STDBY Any Dark