Zhone Technologies IMACS-200 - Manual (Page 220)

12-6 IPR
Model No. Running Head IPR Configuration Screens and Settings IP Routing
Table 12-2. IPR 10B2 and 10BT Ethernet and Default IP Option Settings and Defaults
ETH IPR STATE
Activates or deactivates Ethernet port. The settings are actv or stdby.
ETH IPR ADDR
IPR’s own Ethernet IP address on this IP network.
ETH IPR MASK
The IP netmask value used for this IP network.
ETH IPR RIP
RIP parameters. The default is R&T (Receive & Transmit). Other options are R, T, and none.
ETH IPR SH
Enables or disables split horizon on Ethernet. Options are yes or no.
DEFAULT GATEWAY
IP address of the default gateway.
Parameter User Options Default
ETH IPR STATE actv stdby stdby
ETH IPR ADDR IP Address of Ethernet Port 0.0.0.0
ETH IPR MASK IP mask of Ethernet Port 255.255.255.255
ETH IPR RIP none R T R&T none
EHT IPR SH on off off
DEFAULT GATEWAY ipaddr 0.0.0.0