2 network statistics screens, Network statistics screens -24, Etwork statistics screens – Zhone Technologies IMACS-200 User Manual

Page 108

Advertising
background image

4-24

General Features

Model No.

Running Head

Remote Administration

IMACS-200 General Features

b. Telnet [device IP address]

12. From the IMACS-200:

a. Ping PC on IP network

13. From a PC on a different network than the IP network:

a. Ping [device IP address]

b. Telnet [device IP address]

14. From the IAD, Ping PC on the network different from IP subnetwork.

4.7.2

N

etwork Statistics Screens

The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from off to local or wan, and it continues to store
information until it is turned off.

Figure 4-15 shows the first of eight Network Statistics Screens, and Figure 4-15throughFigure
4-17s
how the other three screens. To go to the first screen, press “n” in the TCP/IP Screen to
choose Netstat from the bottom line of that screen. Table 4-10 lists the actions that can be
taken from the Network Statistics Screens, and the following paragraphs describe the
parameters in each screen.

Figure 4-15.Typical Network Statistics Screen, Page 1

Advertising