Zhone Technologies IMACS-200 - Manual (Page 71)

System Operation 3-29
System Configuration and Operation Circuit Names
Figure 3-17.Cross Connect Screen
Circuits are then selected by moving the arrow keys up and down. Only network type circuits
are shown on the first Cross Connect screen.
To display a list of all cross connects in the IMACS-200 system from the Cross Connect
screen, select "View All". Below is a sample of this screen.Note that this is page one of two.
Using the ‘d’ for pageDown and ‘u’ for pageUp will display more pages.The rename circuit
screens following will be on page 2 of 2.
Figure 3-18.Cross Connect Screen -View All
Renaming Circuits
For the renaming feature, it does not matter which side of the circuit is selected, only the line
at which the original circuit is printed matters.
After hitting the 'n' key on the View All screen, circuits can be rename by hitting 'Enter' as
shown in the following figure.