Zhone Technologies IMACS-200 - Manual (Page 36)

2-10 System Installation
Model No. Running Head Connector Pin-outs System Installation
2.4.4 Ethernet connections
Table 2-7 lists the RJ45 connector pinouts for the ethernet ports on the front and rear of the chassis.
2.4.5 Sub Rate Data Ports
Table 2-8 lists the RJ45 connector pinouts for the five sub rate data ports on the rear of the chassis.
Table 2-6. T1 connector pinouts
RJ-45(F) Pin Signal
1 R1
2 T1
4 R
5 T
3, 6, 7, 8 Not assigned
Table 2-7. Ethernet connector pinouts
RJ-45(F) Pin Signal
1 TXP
2 TXN
3 RXP
4 TXCT
5 RXCT
6 RXN
7 Not used
8 Ground
Table 2-8. Sub Rate Data (SRU) ports connector pinouts
RJ-45(F) Pin Signal Direction
1 SCT Output
2 RLSD Output
3 SCR Output
4 Ground
5 RXD Output