Zhone Technologies IMACS-200 - Manual (Page 150)

6-2 FXS Ports
Model No. Running Head
Figure 6-1. Typical FXS port Main Screen
The bottom highlighted line of this screen shows various actions that you can perform from
this screen. You perform the desired action by pressing the associated uppercase letter key.
Table 6-1 summarizes these actions. For example, after you configure the FXS port ports,
press “s” to save your settings.
Table 6-1. Main Screen Option Settings and Defaults
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields
that are not automatically updated (i.e., test status).
Copy Copies the contents of the current column to the
next column. Useful if you change a lot of entries
in one column and wants to repeat those changes
in subsequent columns.
Test Access is given to the test screen
taBs Index into the signaling conversion screen.
Main Returns to the System Main Screen. If you make
changes to settings and do not save them, you will
be prompted to save or lose changes.