10 disclaimer for shielded cables, 11 panel and cover removal, 12 power source – Zhone Technologies IMACS-200 User Manual

Page 8: 13 ordering guide

Advertising
background image

vi

Product Description

Model No.

Running Head

Disclaimer for Shielded Cables

WARNING!

This equipment has been tested and found to comply with the limits for a Class
"A" Digital Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed
and used in accordance with this Reference Guide, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at their own expense.

The authority to operate this equipment is conditioned by the requirement
that no modifications will be made to the equipment unless the changes or
modifications are expressly approved by the manufacturer.

10

Disclaimer for Shielded Cables

This equipment was tested with shielded input/output and interface cables. It is recommended
that shielded cables be used to reduce interference whenever interference is suspected.

11

Panel and Cover Removal

Only qualified Zhone service technicians should attempt the removal of the cover.

12

Power Source

Please refer to Appendix A, System Specifications in the later in this guide regarding System
Requirements.

13

Ordering Guide

Model Number

Description

IMACS-200-48VDC

IMACS 200 System with single -48 VDC Power Supply

IMACS-200-RDNT-48VDC

IMACS 200 System with two -48 VDC Power Supplies

IMACS-200-48VDC-OHSU

IMACS 200 System with single -48 VDC Power Supply and a 2-port

OHSU daughter card.

Advertising