Zhone Technologies IMACS-200 - Manual (Page 110)

4-26 General Features
Model No. Running Head Remote Administration IMACS-200 General Features
Table 4-10. Network Statistics Screen Actions
4.7.2.1 IP Parameters
The IP parameters appear in the first Network Statistics Screen (Figure 4-15). These are
described below.
Default TTL
The Default TTL field shows the Time To Live for information packets from transmission to
delivery. The TTL for this system is 255 seconds.
Datagrams Received
The Datagrams Received field shows the number of IP datagrams (packets) received by the
local system from the network host.
Datagrams Disported
The Datagrams Disported field shows the number of datagrams that were disported by the
local system.
Datagrams Delivered Above
The Datagrams Delivered Above field shows the number of datagrams sent to the TCP layer
of the network host to the local system.
Datagrams From Above
The Datagrams From Above field shows the number of information or traps sent by the local
system to the UDP or TCP layer of the network host.
Action Function
pgUp Scrolls backward through network statistics, one page at a time. If you are
on the first screen (Page 1), automatically “wraps around” back to the fourth
screen (Page 4).
pgDn Scrolls forward through network statistics, one page at a time. If you are on
Page 4, automatically “wraps around” back to Page 1.
Refresh Since the system does not update statistics automatically, the Refresh
command must be used to update information in statistics fields.
Main Returns to the TCP/IP Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.