Zhone Technologies IMACS-200 - Manual (Page 222)

12-8 IPR
Model No. Running Head IPR Configuration Screens and Settings IP Routing
Table 12-4. IPR Frame Relay Menu Option Settings and Defaults
FRM RLY STATE
Activates or disables the Frame Relay port. Options are actv (active), or stdby (standby).
FRM RLY WAN
Point to the WAN or Server slot. Options are wan-1 through wan-4.
FRM RLY TS
Can only be set for WAN case.
FRM RLY PORT
Frame Relay port type. Choices are u-dte, u-dce, nni, none.
FRM RLY LMI
LMI Encapsulation. Choices are ansi, ccitt, lmi, none.
FRM RLY T391
The Q.933 DTE polling interval, defining the time to send a status enquiry message.
Parameter User Options Default
FRM RLY STATE actv stdby stdby
FRM RLY WAN wan-1 wan-2 wan-3 wan-4 owan-1 owan-2
owan-3 owan-4 none
FRM RLY TS 1-24, 1-31 n/a
FRM RLY PORT u-dte u-dce nni none none
FRM RLY LMI ansi ccitt lmi none n/a
FRM RLY T391 5-30 n/a or 10
FRM RLY T392 5-30 n/a or 15
FRM RLY N391 1-255 n/a or 6
FRM RLY DCE N392 1-10 n/a or 3
FRM RLY DTE N392 1-10 n/a or 3
FRM RLY DCE N393 1-10 n/a or 4
FRM RLY DTE N393 1-10 n/a or 4
FRM RLY LOOPBACK off line local off