Zhone Technologies IMACS-200 - Manual (Page 240)

13-10 OWAN Ports
Model No. Running Head
13.5.1 Cross-Connect (XCON) Screen
The Cross-Connect (Xcon) command in the OWAN port screen allows you to view the time
slot or DS0 assignments that have been set up in the system. Highlight the OWAN on the card
and press the “x” (Xcon) to select Cross-Connect. Either an E1 screen (Figure 13-6) or a T1
screen (Figure 13-7) will appear, depending upon the OWAN type selected and highlighted.
This is a display-only screen.
Figure 13-6.XCON Screen for E1