Zhone Technologies IMACS-200 User Manual

Page 223

Advertising
background image

IPR

12-9

IP Routing

IPR Configuration Screens and Settings

FRM RLY T392

The Q.933 DCE polling interval, defining the time to expect a status enquiry message.

FRM RLY N391

Defines the time interval for the DTE to send a full status enquiry message every N391 polling
cycles.

FRM RLY DCE N392

Defines the number of errors allowed within the last N393 events prior to bringing down the
link.

FRM RLY DTE N392

Defines the number of errors allowed within the last N393 events prior to bringing down the
link.

FRM RLY DCE N393

Used in conjunction with the N392 setting. The Frame Relay link is disabled if there are N392
errors in the last N393 events. DTE events are defined by sending a status enquiry message.
A DCE event is receiving a status enquiry message, or having the T392 timer expire.

FRM RLY DTE N393

Used in conjunction with the N392 setting. The Frame Relay link is disabled if there are N392
errors in the last N393 events. DTE events are defined by sending a status enquiry message.
A DCE event is receiving a status enquiry message, or having the T392 timer expire.

FRM RLY LOOPBACK

Enables or disables loopback on this port. Options are off, line, and local.

Advertising