7 setting tags on channels, 7 setting tags on channels -7, 7 settng tags on channels – Yokogawa µR10000 User Manual
Page 121: App index
6-7
IM 04P01B01-01E
Setup
Operat
ons
for
Conven
ent
Funct
ons
(Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
6.7 Settng Tags on Channels
This section explains the details of setting tags to measurement channels.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key or
SHIFT +
key to select
Aux and then press the key.
3.
Press the
key or
SHIFT +
key to select
Tag and then press the key.
4.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the
Settng complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the
ESC key.
6.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
Set the tag.
The new setting takes effect.
ESC/?
First channel Last channel
Set=Aux
Aux=Tag
CH=01-01
Tag=
01-01 Channel
Setting complete
Explanaton
Characters That Can Be Used for Tags
Set the tag using up to 7 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
2
,
3
, .), and space
<Related Topcs> Printing tags in place of channel numbers: Section 7.7
Displaying tags in place of channel numbers: Section 8.2