Yokogawa µR10000 - Manual (Page 91)

IM 04P01B01-01E
4-4
4.2 Key Operatons
Enterng Characters
Use the key or SHIFT + key to move the cursor.
SHIFT key + key
key
Cursor
Unit=ppm
CHR:a-z
Use the CHARACTER key or SHIFT + CHARACTER key to select the character type.
Use the key or SHIFT + key to select a character. You repeat these steps to set
the character string.
Character type
Unit=ppm
CHR:a-z
The character types change in the following order: uppercase alphabet ( A-Z), lowercase
alphabet ( a-z), numbers (0-9), and symbols (%-.).
A-Z A to Z, and space
a-z a to z, and space
0-9 0 to 9, and space
%-. %, #, °, @, +, –, *, /, (, ), μ, Ω, 2 , 3 , ., and space
SHIFT key + key
key
Unit=ppm
CHR:a-z
p
o
n
l
k
j
When you press the key, the change is applied and the next screen is displayed.
Insertng Characters
Press the key or SHIFT + key to move the cursor to the position where the
character is to be inserted.
Press the
CHARACTER key or SHIFT + CHARACTER key to show Ins DISP and then
press the key. A space for one character is inserted. Enter the character.
Position to insert the character
Display Ins DISP
Unit=ppm
CHR:Ins DISP
Deletng a Character
Use the key or SHIFT + key to move the cursor to the character to be deleted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Del DISP and then
press the key. The character is deleted.
Deletng an Entre Character Strng
Press the CHARACTER key or SHIFT + CHARACTER key to show Clear DISP and
then press the key. The entire character string is deleted.
Copyng & Pastng a Character Strng
Show the copy source character string.
Press the
CHARACTER key or SHIFT + CHARACTER key to show Copy DISP and
then press the key. The character string is saved to the memory.
Show the copy destination.
Press the
CHARACTER key or SHIFT + CHARACTER key to show Paste DISP and
then press the key. The character string is pasted.