10 setting tags on channels, 10 setting tags on channels -18, 10 settng tags on channels – Yokogawa µR10000 User Manual
Page 201
IM 04P01B01-01E
9-18
9.10 Settng Tags on Channels
This section explains the details of setting the tag on computation channels.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key or
SHIFT +
key to select
Math and then press the key.
3.
Press the
key or
SHIFT +
key to select
Aux and then press the key.
4.
Press the
key or
SHIFT +
key to select
Tag and then press the key.
5.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the
Settng complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the
ESC key.
7.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
The new setting takes effect.
ESC/?
Set the tag.
First channel Last channel
0A-0A Channel
Setting complete
Set=Math
Math=Aux
Aux=Tag
Tag=
CH=0A-0A
Explanaton
Characters That Can Be Used for Tags
Set the tag using up to 7 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
2
,
3
, .), and space
<Related Topcs> Printing tags in place of channel numbers: Section 7.7
Displaying tags in place of channel numbers: Section 8.2