20 selecting to show/hide the func key menus, 20 selecting to show/hide the func key menus -31, 20 selectng to show/hde the func key menus – Yokogawa µR10000 User Manual
Page 168: App index
7-31
IM 04P01B01-01E
Setup
Operat
ons
for
Chang
ng/Add
ng
Funct
ons
(Bas
c
Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
7.20 Selectng to Show/Hde the FUNC Key Menus
Select the menu for showing/hiding the FUNC key menus. This function is available on
version 1.31 or later.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Changng the Settngs
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the
key or
SHIFT +
key to select
Select menu and then press the
key.
4.
Press the key with
Functon shown on the screen.
5.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the
Settng complete screen appears, do either of the following:
To correct the setting the key.
If you are done, press the
ESC key.
Basic=Select menu
Manual print=On
Select whether to display Manual
print. Select On or Off.
Menu=Function
Select func menu
Setting complete
Setup list=On
Select whether to display Setup list.
Select On or Off.
The new setting takes effect.
Message=On
Select whether to display Message.
Select On or Off.
Buffer clear=On
Select whether to display Buffer
clear. Select On or Off.
Periodic=On
Select whether to display Periodic.
Select On or Off.
ESC/?