Yokogawa µR10000 - Manual (Page 164)

7-27
IM 04P01B01-01E
Setup
Operat
ons
for
Chang
ng/Add
ng
Funct
ons
(Bas
c
Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
7.17 Intalzng the Settngs
This section explains the details of initializing the recorder settings to their factory default.
Be careful, because all settings except the date/time and the adjustment values of the
pen/dot printing position will be initialized.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
1. Hold down the MENU key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to enter Basic
Setting mode.
3. Press the key or SHIFT + key to select Intalze and then press the
key.
4. Press the key to select the settings to be initialized and then press the
key.
Set:
Initializes the settings in Setting mode.
Setup+Set: Initializes the settings in Basic Setting mode and Setting mode.
5. To execute the initialization, press the key to select Yes and then press the
key.
The settings are initialized, and the recorder returns to Operation mode.
To cancel the initialization, press the
ESC key The screen returns to the
Basc=Intalze screen.
If you press the
key to select No and press then the key, nothing hap-
pens.
Select the range to be initialized.
Select Yes and press to execute
initialization and return to Operation
mode.
ESC/?
Basic=Initialize
Mode=Setup+Set
Are you sure?=Yes
Explanaton
Items That Are Not Intalzed
The following items are not initialized.
• Adjustment value of the pen position and the adjustment value of the printer carriage
position (Basic Setting mode)
• Date/Time (Setting mode)