3 setting the unit, 3 setting the unit -9, 3 settng the unt – Yokogawa µR10000 User Manual
Page 192: App index
9-9
IM 04P01B01-01E
Operat
ons
Related
to
the
Computat
on
Funct
on
(/M1
Opt
on)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
9.3 Settng the Unt
This section explains the details of setting the unit on computation channels.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key or
SHIFT +
key to select
Math and then press the key.
3.
Press the
key or
SHIFT +
key to select
Unt and then press the key.
4.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the
Settng complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the
ESC key.
6.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
The new setting takes effect.
ESC/?
Set the unit.
First channel Last channel
0A-0A Channel
Setting complete
Set=Math
Math=Unit
CH=0A-0A
Unit=
Explanaton
Characters That Can Be Used for Unts
Set the unit using up to 6 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
2
,
3
, .), and space