Yokogawa µR10000 - Manual (Page 208)

9-25
IM 04P01B01-01E
Operat
ons
Related
to
the
Computat
on
Funct
on
(/M1
Opt
on)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
9.15 Changng the Type of Report Data Prnted n
Perodc Prntout
This section explains the details of selecting the type of report (the average, minimum,
maximum, or sum) printed in periodic printout.
To print the report data during periodic printout, set the type of data to be printed to report
(see section 7.8).
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Changng the Settngs
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to enter Basic
Setting mode.
3. Press the key or SHIFT + key to select Math and then press the key.
4. Press the key or SHIFT + key to select Prnt2 and then press the
key.
5. Set each item and press the key.
Use the key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6. When the Settng complete screen appears, do either of the following:
To correct the setting, press the key.
If you are done, press the
ESC key.
Set the channel range.
The new setting takes effect.
ESC/?
Select the type of report data to print.
Select the sum scale.
First channel Last channel
Periodic
Setting complete
Basic=Math
Math=Print2
CH=0A-0A
Mode=AVE
SUM scale=Off
Applyng the Changes and Returnng to Operaton Mode
Press the key or SHIFT + key to select End and then press the key. Press
the key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basc= screen.