Displaying bfd application information, Displaying bfd neighbor information – Brocade BigIron RX Series Configuration Guide User Manual

Page 1064

Advertising
background image

986

BigIron RX Series Configuration Guide

53-1002484-04

Displaying Bidirectional Forwarding Detection information

30

Displaying BFD application information

The following example illustrates the output from the show bfd application command.

BigIron RX# show bfd application

Registered Protocols Count: 3

Protocol Parameter

ospf 1

ospf6 0

isis_task 0

This display shows the following information.

Displaying BFD neighbor information

The following example illustrates the output from the show bfd neighbor command.

BigIron RX# show bfd neighbor

Total number of Neighbor entries: 2

NeighborAddress State Interface Holddown Interval RH

12.14.1.1 UP eth 3/1 300000 100000 1

12.2.1.1 UP eth 2/1 300000 100000 1

Syntax: show bfd neighbor [interface ethernet <slot/port> | interface pos <slot/port> | interface

ve <port-no>]

The interface ethernet option displays BFD neighbor information for the specified ethernet
interface only.

Maximum Exceeded Count for LPs The number of times the request to set up a BFD session was declined

because it would have resulted in exceeding the maximum number of
BFD sessions allowed on an Interface module.

LP

The number of the Interface module that the Current Session Count is
displayed for.

Sessions

The number of BFD sessions currently operating on the specified
Interface module.

BFD Enabled ports count

The number of ports on the router that have been enabled for BFD.

Port

The port that BFD is enabled on.

MinTx

The interval in milliseconds between which the router desires to send a
BFD message from this port to its peer.

MinRx

The interval in milliseconds that this router desires to receive a BFD
message from its peer on this port.

Mult

The number of times that the router will wait for the MinRx time on this
port before it determines that its peer router is non-operational.

Sessions

The number of BFD sessions originating on this port.

TABLE 156

Display of BFD application information

This field...

Displays...

Parameter

The parameter value passed by the protocol during registration with BFD.

TABLE 155

Display of BFD information (Continued)

This field...

Displays...

Advertising