Vlan – Brocade BigIron RX Series Configuration Guide User Manual
Page 1548
1470
BigIron RX Series Configuration Guide
53-1002484-04
VLAN
E
VLAN
show link-keepalive [ethernet
<
portnum>]
“Displaying information for all ports”
“Displaying information for a single port”
show link-keepalive ethernet
<
slot/port>
“Displaying information for all ports”
Commands
See ...
Commands
See ...
add-vlan
<
vlan-id> [to
<
vlan-id>]
aggregated-vlan
“Configuring aggregated VLANs”
default-vlan-id
<
vlan-id>
“Assigning a different ID to the default VLAN”
ip-proto | ipv6-proto | ipx-proto | atalk-proto | other-proto
[
<
protocol-vlan-name>]
[static | exclude ethernet
<
slot/port> [to
<
slot/port>]
[router-interface ve
<
num>]
“Configuring protocol-based VLANs”
multicast-flooding
“Hardware flooding for Layer 2 multicast and
broadcast packets”
priority
<
num>
“Assigning or changing a VLAN priority”
remove-vlan
<
vlan-id> [to
<
vlan-id>]
show vlan [
<
vlan-id> | ethernet
<
slot/port> | detail | |
begin
<
expression> | exclude
<
expression> | include
<
expression>]
show vlan-group [
<
group-id>]
“Displaying VLAN group information”
system-max vlan
<
num>
“Allocating memory for more VLANs or virtual routing
interfaces”
tagged ethernet [to
<
slot/port> | ethernet
<
slot/port>]
tag-type
<
num> [ethernet
<
slot/port> [to
<
slot/port>]]
“Configuring aggregated VLANs”
“Enabling 802.1Q-in-Q tagging”
“Enabling 802.1q tag-type translation”
unknown-unicast-flooding
“Unknown unicast flooding on VLAN ports”
untagged | tagged ethernet
<
slot/port> [to
<
slot/port> |
ethernet
<
slot/port>]
“Configuring port-based VLANs”
“Configuring aggregated VLANs”
uplink-switch ethernet
<
portnum> [to
<
portnum> |
ethernet
<
portnum>]
“Configuring uplink ports within a port-based VLAN”
vlan
<
vlan-id>
“Configuring port-based VLANs”
vlan
<
vlan-id> [by port]
“Configuring aggregated VLANs”
vlan
<
vlan-id>
[name
<
vlan-name>]
“Configuring port-based VLANs”
vlan-group
<
num> vlan
<
vlan-id> to
<
vlan-id>