Brocade BigIron RX Series Configuration Guide - Manual (Page 1295)

BigIron RX Series Configuration Guide 1217
53-1002484-04
Displaying RIPng information
45
TABLE 200 RIPng routing table fields
This field... Displays...
RIPng Routing Table entries The total number of entries in the RIPng routing table.
< ipv6-prefix>/ < prefix-length>
< ipv6-address>
The IPv6 prefix and prefix length.
The IPv6 address.
Next-hop router The next-hop router for this Brocade device. If:: appears, the route is
originated locally.
Interface The interface name. If “null” appears, the interface is originated locally.
Source of route The source of the route information. The source can be one of the following:
•
RIP – routes learned by RIPng.
•
CONNECTED – IPv6 routes redistributed from directly connected
networks.
•
STATIC – IPv6 static routes are redistributed into RIPng.
•
BGP – BGP4+ routes are redistributed into RIPng.
•
ISIS – IPv6 IS-IS routes are redistributed into RIPng.
•
OSPF – OSPFv3 routes are redistributed into RIPng.
Metric < number> The cost of the route. The < number> parameter indicates the number of
hops to the destination.
Tag < number> The tag value of the route.
Timers: Indicates if the hold-down timer or the garbage-collection timer is set.