Brocade BigIron RX Series Configuration Guide - Manual (Page 1518)

1440 BigIron RX Series Configuration Guide
53-1002484-04
IS-IS
E
maximum-paths < number> “Changing the maximum number of load sharing
paths”
on page 959
max-lsp-lifetime < secs> “Changing the maximum LSP lifetime” on page 956
metric-style wide [level-1-only | level-2-only] “Changing the metric style” on page 958
net < area-id>. < system-id>. < sel> “Enabling IS-IS globally” on page 951
“Disabling and enabling IS-IS on an interface” on
page 965
redistribute bgp [level-1 | level-1-2 | level-2 | metric
< number> | metric-type external | internal | route-map
< name>]
“Redistributing BGP4+ routes into IPv4 IS-IS” on
page 964
redistribute connected [level-1 | level-1-2 | level-2 |
metric
< number> | metric-type external | internal |
route-map < name>]
“Redistributing directly connected routes into IPv4
IS-IS”
on page 963
redistribute isis level-1 into level-2 | level-2 into level-1
[prefix-list
< name>]
“Redistributing IPv4 IS-IS routes within IPv4 IS-IS” on
page 964
redistribute ospf [level-1 | level-1-2 | level-2 | match
external1 | external2 | internal | metric
< number> |
metric-type external | internal | route-map < name>]
“Redistributing OSPF routes into IPv4 IS-IS” on
page 963
redistribute rip [level-1 | level-1-2 | level-2 | metric
< number> | metric-type external | internal | route-map
< name>]
“Redistributing RIP routes into IPv4 IS-IS” on
page 963
redistribute static [level-1 | level-1-2 | level-2 | metric
< number> | metric-type external | internal | route-map
< name>]
“Redistributing static IPv4 routes into IPv4 IS-IS” on
page 962
retransmit-interval “Changing the LSP interval and retransmit interval”
on page 956
route-map < map-name> permit | deny
< sequence-number>
“Enabling advertisement of a default route” on
page 959
router isis “Global configuration level” on page 950
“Disabling and enabling IS-IS on an interface” on
page 965
set level level-1 | level-1-2 | level-2 “Enabling advertisement of a default route” on
page 959
set-overload-bit [on-startup < secs>] “Setting the overload bit” on page 952
show isis config “Displaying the IS-IS configuration in the
running-config”
on page 969
show isis counts “Displaying error statistics” on page 979
show isis database [ < lsp-id> | detail | l1 | l2 | level1 |
level2]
“Displaying summary information” on page 975
show isis database detail [l1 | l2 | level1 | level2] “Displaying detailed information” on page 976
show isis hostname “Displaying the name mappings” on page 969
show isis interface “Displaying interface information” on page 972
show isis neighbor “Displaying neighbor information” on page 969
show isis routes “Displaying route information” on page 974
Commands See ...