Brocade BigIron RX Series Configuration Guide - Manual (Page 633)

BigIron RX Series Configuration Guide 555
53-1002484-04
Configuring MCT
20
Client #1
!
lag "1" dynamic id 1
ports ethernet 1/1 to 1/2
primary-port 1/1
deploy
port-name "lag-to TOR-A" ethernet 1/1
port-name "lag-to TOR-B" ethernet 1/2
!
end
----------------------------------------
Client #2
!
lag "1" dynamic id 1
ports ethernet 1/1 to 1/2
primary-port 1/1
deploy
port-name "lag-to TOR-A" ethernet 1/1
port-name "lag-to TOR-B" ethernet 1/2
!
vlan 2
untagged ethe 1/1 to 1/3
router-interface ve 2
!
router ospf
area 0
!
interface ethernet 1/3
port-name L3-ECMP-Cloud
!
interface ve 2
ip address 10.10.10.1/24
ip ospf area 0
!
end
----------------------------------------
Client #3
!
lag "1" dynamic id 1
ports ethernet 1/1 to 1/2
primary-port 1/1
deploy
port-name "lag-to TOR-A" ethernet 1/1
port-name "lag-to TOR-B" ethernet 1/2
!
vlan 2
untagged ethe 1/1 to 1/3
router-interface ve 2
!
router ospf
area 0
!
interface ethernet 1/3
port-name L3-ECMP-Cloud
!
interface ve 2