Brocade BigIron RX Series Configuration Guide - Manual (Page 1476)

1398 BigIron RX Series Configuration Guide
53-1002484-04
Syslog messages
A
Notification OSPF intf authen failure, rid < router-id>,
intf addr < ip-addr>,
pkt src addr < src-ip-addr>,
error type < error-type>, pkt type < pkt-type>
Indicates that an OSPF interface
authentication failure has occurred.
The
< router-id> is the router ID of the device.
The < ip-addr> is the IP address of the
interface on the device.
The
< src-ip-addr> is the IP address of the
interface from which the device received the
authentication failure.
The
< error-type> can be one of the following:
•
bad version
•
area mismatch
•
unknown NBMA neighbor
•
unknown virtual neighbor
•
authentication type mismatch
•
authentication failure
•
network mask mismatch
•
hello interval mismatch
•
dead interval mismatch
•
option mismatch
•
unknown
The < packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation