Brocade BigIron RX Series Configuration Guide - Manual (Page 1472)

1394 BigIron RX Series Configuration Guide
53-1002484-04
Syslog messages
A
Notification OSPF interface state changed,
rid
< router-id>, intf addr < ip-addr>,
state < ospf-state>
Indicates that the state of an OSPF interface
has changed.
The
< router-id> is the router ID of the device.
The < ip-addr> is the interface’s IP address.
The < ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown
Notification OSPF virtual intf state changed,
rid
< router-id>, area < area-id>,
nbr < ip-addr>, state < ospf-state>
Indicates that the state of an OSPF virtual
routing interface has changed.
The
< router-id> is the router ID of the router
the interface is on.
The
< area-id> is the area the interface is in.
The < ip-addr> is the IP address of the OSPF
neighbor.
The
< ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation