Brocade BigIron RX Series Configuration Guide User Manual
Page 1278
1200
BigIron RX Series Configuration Guide
53-1002484-04
Displaying global IPv6 information
44
•
Detailed information about a specified TCP connection.
To display general information about each TCP connection on the router, enter the following
command at any CLI level.
Syntax: show ipv6 tcp connections
This display shows the following information.
TABLE 195
General IPv6 TCP connection fields
This field...
Displays...
Local IP address:port
The IPv4 or IPv6 address and port number of the local router interface
over which the TCP connection occurs.
Remote IP address:port
The IPv4 or IPv6 address and port number of the remote router interface
over which the TCP connection occurs.
BigIron RX# show ipv6 tcp connections
Local IP address:port
<
-> Remote IP address:port TCP state
192.168.182.110:23
<
-> 192.168.8.186:4933
ESTABLISHED
192.168.182.110:8218
<
-> 192.168.182.106:179
ESTABLISHED
192.168.182.110:8039
<
-> 192.168.2.119:179
SYN-SENT
192.168.182.110:8159
<
-> 192.168.2.102:179
SYN-SENT
2000:4::110:179
<
-> 2000:4::106:8222 ESTABLISHED
(1440)
Total 5 TCP connections
TCP MEMORY USAGE PERCENTAGE
FREE TCB = 98 percent
FREE TCP QUEUE BUFFER = 99 percent
FREE TCP SEND BUFFER = 97 percent
FREE TCP RECEIVE BUFFER = 100 percent
FREE TCP OUT OF SEQUENCE BUFFER = 100 percent