Brocade BigIron RX Series Configuration Guide - Manual (Page 1467)

BigIron RX Series Configuration Guide 1389
53-1002484-04
Syslog messages
A
Syslog messages
Table 242 lists all of the Syslog messages. The messages are listed by message level, in the
following order:
• Emergencies (none)
• Alerts
• Critical
• Errors
• Warnings
• Notifications
• Informational
• Debugging
TABLE 242 Brocade Syslog messages
Message level Message Explanation
Alert Power supply < num>, < location>, failed A power supply has failed.
The
< num> is the power supply number.
The < location> describes where the failed
power supply is in the device.
Alert Fan < num>, < location>, failed A fan has failed.
The
< num> is the power supply number.
The < location> describes where the failed
power supply is in the device.
Alert Management module at slot < slot-num>
state changed from < module-state> to
< module-state>.
Indicates a state change in a management
module.
The
< slot-num> indicates the device slot
containing the module.
The
< module-state> can be one of the
following:
•
active
•
standby
•
crashed
•
coming-up
•
unknown
Alert Temperature < degrees> C degrees, warning
level < warn-degrees> C degrees, shutdown
level < shutdown-degrees> C degrees
Indicates an overtemperature condition on
the active module.
The
< degrees> value indicates the
temperature of the module.
The
< warn-degrees> value is the warning
threshold temperature configured for the
module.
The
< shutdown-degrees> value is the
shutdown temperature configured for the
module.
Alert < num-modules> modules and 1 power
supply, need more power supply!!
Indicates that the device needs more power
supplies to run the modules in the device.
The
< num-modules> parameter indicates the
number of modules in the device.
Alert OSPF Memory Overflow OSPF has run out of memory.