Brocade BigIron RX Series Configuration Guide - Manual (Page 639)

BigIron RX Series Configuration Guide 561
53-1002484-04
Configuring MCT
20
MRP integration with MCT example
Figure 96 shows the MRP integration with the MCT topology.
FIGURE 96 MRP integration with MCT
Switch A
lag "1" dynamic id 1
ports ethernet 1/1 to 1/2
primary-port 1/1
deploy
port-name "ICL-to-Switch-2:1/1" ethernet 1/1
port-name "ICL-to-Switch-2:1/2" ethernet 1/2
!
lag "2" dynamic id 2
ports ethernet 1/3 to 1/4
primary-port 1/3
deploy
port-name "lag-client-1:1/1" ethernet 1/3
port-name "lag-client-1:1/2" ethernet 1/4
!
no route-only
!
vlan 1 name DEFAULT-VLAN
no untagged ethe 1/1 to 1/2
!
vlan 2 name client-VLAN
untagged ethe 1/3 to 1/5
tagged ethe 1/1 to 1/2
metro-ring-1
ring-interfaces ethe 1/1 ethe 1/5
enable
!
vlan 4090 name Session-VLAN
tagged ethe 1/1 to 1/2
router-interface ve 100
!
hostname Switch-1
!
MRP
ICL
F F
F
F
F F
F
B
F
Switch Switch
MRP
Master
1/1-1/4
1/3-1/4 1/3-1/4
1/5
1/1-1/2 1/1-1/2
MCT logical
switch
A B
ICL
F F
F
1/3-1/4 1/3-1/4
1/
1/1-1/2 1/ 1/1-1/2 2 2
MCT logical
switch
Client switch