Brocade BigIron RX Series Configuration Guide - Manual (Page 656)

578 BigIron RX Series Configuration Guide
53-1002484-04
Syslogs and debugging
20
The debug cluster ccp packet command displays information specific to the CCP packet exchange
operation.
Command output resembles the following example.
BigIron RX# debug cluster ccp packet
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001
cluster_rbridge_id 00000005 magic_no 000014ef
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge id
found
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalive
packet to be sent on VE interface - using source mac address 001bed3b 0000a200
Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,
port 1/3
Nov 23 08:42:42 Couldn't get the Area ID for patherr from 13.13.13.5
Nov 23 08:42:42 Couldn't get the Area ID for patherr from 13.13.13.5
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001
cluster_rbridge_id 00000005 magic_no 000014ef
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge id
found
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalive
packet to be sent on VE interface - using source mac address 001bed3b 0000a200
Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,
port 1/3
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001
cluster_rbridge_id 00000005 magic_no 000014ef
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge id
found
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalive
packet to be sent on VE interface - using source mac address 001bed3b 0000a200
Nov 23 08:42:42 CLUSTER CCP PACKET: Tx L2VPN CCP Keepalive IP 5.5.5.5, vlan 31,
port 1/3
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - cluster id 00000001
cluster_rbridge_id 00000005 magic_no 000014ef
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive - matching cluster rbridge id
found
Nov 23 08:42:42 CLUSTER CCP PACKET: Rx Keepalive -Received CCP Keepalive
Syntax: [no] debug cluster ccp packet
The debug cluster client command displays the MCT state machine debugging information for a
specific client.
Command output resembles the following example when CCP is up.
BigIron RX# debug cluster client
SYSLOG: Jun 1 18:06:50:<9>Jun 1 18:06:50 3P-19-5-TB3-4, CLUSTER CCP:CCP session
up
Jun 1 18:06:50 CLUSTER FSM: cluster id 1, peer rbridge id 2, old state: Init,
event: CCP Up
Jun 1 18:06:50 CLUSTER FSM: new state: Loading
Jun 1 18:06:50 CLUSTER FSM: Received CCRR_CU message from peer
Jun 1 18:06:50 CLUSTER FSM: cluster id 1, client id 4, old state: Init, event:
CCP Up
Jun 1 18:06:50 CLUSTER FSM: Last CU state: Unknown, new CU state: Admin Up
Jun 1 18:06:50 CLUSTER FSM: new state: CCP Up, master: TRUE
Jun 1 18:06:50 CLUSTER FSM: cluster id 1, client id 4, old state: Admin Up,
event: Remote Up
Jun 1 18:06:50 CLUSTER FSM: new state: Remote Up, master: FALSE
Jun 1 18:06:50 CLUSTER FSM: Received Loading-Done message from peer