Brocade BigIron RX Series Configuration Guide - Manual (Page 889)

BigIron RX Series Configuration Guide 811
53-1002484-04
Displaying OSPF information
26
Note the "<in graceful restart state...>" entry appears only during restart. It does not appear once
restart is complete. The restarting router should resync LSDB with its peers when the restart has
completed.
BigIron RX 1# show ip ospf neigh
Port Address Pri State Neigh Address Neigh ID Ev Opt Cnt
3/7 40.0.1.1 1 EXST/DR 40.0.1.3 9.0.1.24 24 2 0
<
in graceful restart state, helping 1, timer 112 sec >
BigIron RX 3# show ip ospf neighbor
Port Address Pri State Neigh Address Neigh ID Ev Opt Cnt
2/2 40.0.10.1 1 EXST/DR 40.0.10.3 8.0.0.23 23 2 0
<
in graceful restart state, helping 1, timer 111 sec >