Brocade BigIron RX Series Configuration Guide - Manual (Page 1315)

BigIron RX Series Configuration Guide 1237
53-1002484-04
Displaying BGP4+ information
46
This display shows the following information.
TABLE 202 Detailed BGP4+ route information
This field... Displays...
Number of BGP4+ Routes advertised to
specified neighbor (appears only in
display for all routes) For information about this field, refer to Table 201 on page 1234.
Status codes For information about this field, refer to Table 201 on page 1234.
Prefix For information about this field, refer to Table 201 on page 1234.
Status For information about this field, refer to Table 201 on page 1234.
Age The age of the advertised route, in seconds.
Next Hop For information about this field, refer to Table 201 on page 1234.
Learned from Peer The IPv6 address of the neighbor from which this route is learned. “Local
router” indicates that the switch itself learned the route.
LOCAL_PREF For information about this field, refer to Table 201 on page 1234.
MED The value of the advertised route’s MED attribute. If the route does not
have a metric, this field is blank.
BigIron RX# show ipv6 bgp routes detail
Total number of BGP Routes: 2
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED
1 Prefix: 2002::/16, Status: BL, Age: 2d17h10m42s
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1, ORIGIN: incomplete, Weight: 32768
AS_PATH:
Adj_RIB_out count: 1, Admin distance 190
2 Prefix: 2002:1234::/32, Status: BL, Age: 2d17h10m42s
NEXT_HOP: ::, Learned from Peer: Local Router
LOCAL_PREF: 100, MED: 1, ORIGIN: incomplete, Weight: 32768
AS_PATH:
Adj_RIB_out count: 1, Admin distance 190