Brocade BigIron RX Series Configuration Guide User Manual
Page 62
lxii
BigIron RX Series Configuration Guide
53-1002484-04
IPv6 Load Sharing over ECMP
and Trunks
When the device receives traffic for a destination,
and the IPv6 route table contains multiple,
equal-cost paths to that destination, the packets
are load balanced between multiple next-hops
including member ports of a trunk.
Book: BigIron RX Series
Configuration Guide
Chapter:
Section:
Directly Attached Host
Resource Allocation
The CAM allocations can be re-distributed using the
cam-partition next-hop command.
Book: BigIron RX Series
Configuration Guide
Chapter:
Section:
Multicast Boundaries
The Multicast Boundary feature is designed to
selectively allow or disallow multicast flows to
configured interfaces.
Book: BigIron RX Series
Configuration Guide
Chapter:
Section:
IPv6 PIM-SM
Book: Foundry BigIron RX
Configuration Guide
Embedded RP
Embedded RP allows the router to learn RP
information using the multicast group destination
address instead of the statically configured RP.
Book: Foundry BigIron RX
Configuration Guide
MLD Snooping
Book: Foundry BigIron RX
Configuration Guide
MBGP for IPv6
This release supports the Multi-protocol Border
Gateway Protocol (MBGP) for IPv6.
Book: BigIron RX Series
Configuration Guide
Chapter:
IPv6 mroute
This release supports multicast route table ipv6
multicast display and management.
Book: BigIron RX Series
Configuration Guide
Chapter:
Section:
IPv6 MulticastRoute Table
Manager
Book: Foundry BigIron RX
Configuration Guide
Multicast MLL Sharing
Book: Foundry BigIron RX
Configuration Guide
Passive Multicast Route
Insertion (PMRI)
This new feature prevents unwanted multicast
traffic from being sent the CPU by conditionally
dropping unwanted multicast traffic in hardware.
Book: BigIron RX Series
Configuration Guide
Chapter:
TABLE 14
Summary of enhancements in release 02.4.00 (Continued)
Enhancement
Description
See page