IDEX Health & Science VS-606V7 Series - Manual (Page 129)

129
8. Fault Diagnosis and Corrective Actions
This section describes the alarm and fault displays, explanations for fault conditions
and corrective actions to be taken if the VS-606V7 malfunctions.
< Corrective Actions for models with blank cover >
1. Input fault reset or cycle the power supply OFF and ON.
2. When a fault cannot be corrected:
(1) Turn the power supply OFF and check the wiring and external circuit (sequence).
(2) Turn the power supply OFF and replace the blank cover with the digital operator to
display faults. The faults are displayed after turning the power ON.