Operation – IDEX Health & Science VS-606V7 Series User Manual
Page 8
8
OPERATION
WARNING
(Ref. page)
•
Only turn ON the input power supply after replacing the
digital operator/blank cover (optional).
Do not remove the digital operator or the covers while
current is flowing.
Failure to observe this warning can result in electric shock.
•
Never operate the digital operator or dip switches when
your hand is wet.
Failure to observe this warning can result in electric shock.
•
Never touch the terminals while current is flowing, even
during inverter stopping.
Failure to observe this warning can result in electric shock.
•
When the fault retry function is selected, stand clear of
the inverter or the load, since it may restart suddenly
after being stopped.
(Construct machine system, so as to assure safety for personnel,
even if the inverter should restart.) Failure to observe this
warning can result in personal injury. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
•
When continuous operation after power recovery is selected,
stand clear of the inverter or the load, since it may restart
suddenly after being stopped.
(Construct machine system, so as to assure safety for personnel,
even if the inverter should restart.) Failure to observe this
warning can result in personal injury. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
•
Since the digital operator stop button can be disabled by a
function setting, install a separate emergency stop switch.
Failure to observe this warning can result in personal injury.
•
If an alarm is reset with the operation signal ON, the inverter
restarts automatically. Only reset the alarm after verifying that
the operation signal is OFF.
Failure to observe this warning can result in personal injury. . . . . . . . . . . . . . 27