2N Lift8 v1.6.0 - Manual (Page 120)

120
2N TELEKOMUNIKACE a.s., www.2n.cz
®
914 Delayed call 0–1000 s 0 s
Used only with connected
CANCEL input on the cabin
audio unit.
915
Max.
TRIPHONY
time
10–9999 s 7200 s
Maximum TRIPHONY period
after which TRIPHONY is
terminated automatically.
917
Hang-up time
between calls
500–9999 ms 5000 ms For PSTN lines only.
918
Max.
telephone
line test time
1–20s 5 s not implemented
940
Min. dialtone
period
200–2000 ms 400 ms
The tone must be longer
than a half-period of the
busy tone!
941
Min. constant
tone time
200–9999 ms 2000 ms not implemented
942
Min. busy
tone period
100–500 ms 200 ms
These parameters control
the busy tone detection. 944
Max. tone –
gap
difference
10–400 ms 50 ms
945
Min. busy
tone period
count
2–50 5
948
Min. ringback
tone time
50–2000 ms 200 ms not implemented
949
Min. long
space time of
ringback tone
100–5000 ms 2500 ms not implemented
950
Max. long
space time of
ringback tone
500–9999 ms 5500 ms not implemented
951
Min. ringing
signal time
50–2000 ms 200 ms
Incoming call detection:
The ringtone time is the
sum of sections between
which there is no long gap.
The longest gap in the
ringing period must be in
the interval between
parameters 952 and 953.
CAUTION! Parameters
951–953 (default values)
work for incoming ringing.
952
Min. long
space time of
ringing
signal
100–5000 ms 1000 ms
953
Max. long
space time of
ringing signal
500–9999 ms 6000 ms
961
Max. next
digit pressing
time
15–120 s 60 s
Counted from the transition
to a new state (NOT after
the end of announcement).
962
Min. cabin
ALARM
button
pressing time
10–9999 ms 100 ms
A low value is
recommended for
comfortable product
testing.